CONTENT AVAILABLE | 1 kg, 7,5 kg |
---|
Aka-Resin Epoxy
Black mineral-filled epoxy resin for hot mounting. Provides the best possible embedding result with low shrinkage and best edge retention.
Curing specifications based on mount diameter:
25 mm: 7.5 kN 3 min
30 mm: 10.5 kN 4 min
40 mm: 19 kN 5 min
50 mm: 30 kN 6 min
Cure at 160 – 180 ℃. If the mount is not fully cured, increase time.