1 kg, 7.5 kg
Acrylic resin for hot mounting. Thermoplastic acrylic compound for clear embedding with low shrinkage. Clear mounts are optimal in for example failure analysis.
Curing specifications based on mount diameter:
25 mm: 7.5 kN 3 min
30 mm: 10.5 kN 4 min
40 mm: 19 kN 5 min
50 mm: 30 kN 6 min
Cure at 160 – 180 ℃. If not fully cured, increase time.
If you experience a white cotton ball in the mount, the resin has picked up moisture. Dry the resin in an oven at 60 ℃ for 2 hours to solve the problem.