Epoxy curing agent. Slow cure schedule. It is suitable for both impregnation and heat sensitive samples due to long pot-life and low peak temperature.
Cures in 8-24 h at 22 ℃.
Peak temperature is 40 ℃ in a 40 mm dia. mount. For best results apply a post-cure at 100 ℃ for 1 h.
For moulds larger than 40 mm dia. it is recommended to use forced cooling in a fume hood to avoid thermal runaway.
Mix exactly 25.0 g of Aka-Cure Slow-2 with 100 g of Aka-Resin Liquid Epoxy (alternatively, 27 ml/100 ml).
Viscosity: 750 cps at 25 ℃.