Aka-Poly Water-free

Polycrystalline diamonds; 15 µm to 0.25 µm

Aka-Poly WF is developed to obtain the best preparation results for water sensitive materials. When used in combination with a water-free lubricant, like Aka-Lube Clear, high removal rates and short preparation times can be achieved. Aka-Poly WF is based on the same components as our diamond paste and contains less than 0.1% water.

Aka-Poly WF:

  • Fast preparation of water sensitive materials
  • Precise adjustment of suspension/lubricant ratio
  • Reproducible results
  • Easy to clean
  • Biodegradable
  • Has no hazard warnings

All our diamond products contain the same amount of diamonds in ct/l for all grain sizes. Competitors’ products usually decrease the diamond contents with smaller grain sizes. Therefore, our products in the grain sizes from 50 nm up to 3 µm have a diamond concentration that is 2 - 3 times higher than competing products. A higher diamond concentration will provide higher removal rates and faster preparation.

 

  • Aka-Poly WF 1 µm 1 l

    Aka-Poly WF 1 µm 1 l

    Water-free Polycrystalline Diamond Suspension for metallographic specimen preparation.

  • Aka-Poly WF 3 µm 250 ml

    Aka-Poly WF 3 µm 250 ml

    Water-free Polycrystalline Diamond Suspension for metallographic specimen preparation.

  • Aka-Poly WF 3 µm 1 l

    Aka-Poly WF 3 µm 1 l

    Water-free Polycrystalline Diamond Suspension for metallographic specimen preparation.